Long time not using the computer, through the function keys on the keyboard LCD screen only temporarily turned off, in addition to saving electricity can also be extended outside the screen life.

Do not force the LCD screen cover screen cover or place any foreign objects between the keyboard and display screen, cover glass to avoid stress caused by damage to internal components.

Do not use fingernails and sharp objects (hard object) touch screen to avoid scratching the surface.

LCD screen surface due to static electricity and attract dust, it is recommended to buy liquid crystal display screen special cloth to clean your screen, do not shoot except with your fingers to avoid leaving fingerprints, and gently wipe.

Do not use chemical cleaners to wipe the screen.

Batteries (Battery)

When no external power supply case, if the working conditions at the time slot being less than PCMCIA cards, it is recommended to remove the card first to extend battery life.

Room temperature (20-30 degrees) for optimum battery working temperature, the temperature is too high or too low, the operating environment will reduce battery time.

Can provide a stable power supply environment using a laptop computer, remove the battery for extended battery life is not right by. On ASUS notebooks, when the battery fully charged, the battery charging circuit will automatically shut down, so the phenomenon of overcharging does not occur.

Recommended to conduct a three-month average battery power correction action. Power adapter (AC Adapter) when used with reference to international voltage that "

Keyboard (Keyboard)

Accumulated dust, used a small brush to clean the cracks, or use the camera lens is usually in the high-pressure jet cleaning tank, blow the dust, or use a handheld vacuum cleaner to remove dust and debris on the keyboard.

Clean surface can be coated with a soft cloth on a little cleaner, in the case of gently wipe off the keyboard surface.

HDD (Hard Disk)

In a stable condition as possible, to avoid shaking the place is easy to operate in the computer.

Switch process is most vulnerable when the hard disk. At this point the hard disk speed is not stable yet bearing, if the vibration is likely to cause broken rails. It is suggested that after waiting for about ten seconds or so off and then move the laptop.

Average once a month and re-scan the disk to improve disk access efficiency.

FDD (Floppy)

Avoid using bad or moldy appearance of floppy disk.

Buy floppy drive cleaning tablets, regularly clean the read-write heads.

CD-ROM (CD-ROM)

Use a disc cleaning tablets, regular cleaning laser lens.

Your hands and land into the disc drive, one hand supporting the CD tray in one hand and the CD is indeed a fixed piece, the CD tray to avoid distortion.

Touchpad (Touchpad)

When using the touchpad sure to keep hands clean to avoid running around the phenomenon of the cursor.

Accidentally soiled surface, can be dry cloth to gently wipe damp corner of the touchpad surface, do not use rough cloth to wipe surfaces and other items.

Touchpad is sensing precision electronic components, do not use sharp objects to write on the touch panel, the weight should not be used to avoid damage.

Heat (Thermal Dissipation)

In general, notebook computer manufacturers will be through the fan, heat pipe (Heat Pipe), a large heat sink, cooling holes and other ways to reduce the use of heat generated.

To save power and avoid the noise, the laptop fan is not always running, but CPU reaches a certain temperature, the fan will start.

Laptop on a soft items, such as: bed, sofa, may block the ventilation holes affect the operation of the cooling effect and thus reduce performance or even crash.